Venting
Methods
-All our Cavaliere & Cavaliere-Euro
hoods can be non-vented (re-circulating).
Ductless conversion is intended
for applications where an exhaust
duct work is not possible to
be installed. When converted,
the hood functions as a purifying
hood rather than an exhuast
hood. Fumes and exhaust from
cooking is drawn and filtered
by a set of charcoal filters.
The air is then purified and
re-circulated back within the
home.
-We recommend to always exhaust
air outsie of the home by employing
existing or installing new duct
work, if possible. Only when
the exhaust option is not possible
should you recourse to converting
the hood into a purifying unit.
 -When converted to be a "purifying"
unit, a set of charcoal filters
and an air-diverter are required
in addition to its standard
aluminum filter set. The standard
aluminum filters are intended
to capture residue from cooking,
the optional charcoal filters
help to purify fumes exhausted
from cooking, and the optional
air-diverter redirects filtered
clean air back to the house.
Charcoal
Filter Installation
 1. Remove aluminum filters
on hood.
2. Position the charcoal filters
onto each side of the motor
and turn until it locks. Re-install
aluminum filters.
3. Charcoal filters must be
replaced after 120 hours of
use (or approximately every
2 to 3 months based on the average
of 1 to 2 hours of daily cooking
time.)
4. Place the air diverter directly
above the range hood with its
6" round hole faces downward.
Level it and mark the locations
of the air diverter holes on
the wall.
|
